This section outlines the major ACL changes between versions 1.5 and 2.5 series (including 1.6 and 1.7). The table below summarizes the major changes from version 1.5.
||Version 1.5||2.5 series|
|Groups||7 fixed groups (Public, Registered, Author, Editor, Publisher, Manager, Administrator, and Super-Administrator)||Unlimited user-defined Groups|
|Users & Groups||A User can be assigned to only one group||A User can be assigned to multiple groups|
|Access Levels||3 fixed Access Levels (Public, Registered, Special)||Unlimited user-defined Access Levels|
|Access Levels & Groups||Relationship between Groups and Access Levels was fixed.||Groups are assigned to Access Levels. Any combination of Groups can be assigned to any Access Level.|
We see that in every case the ACL has been made much more flexible, with unlimited Groups and Access Levels, and the ability to assign one User to multiple Groups and any Groups to any Access Level.
The Joomla ACL system can be thought of as being divided into two completely separate systems. One system controls what things on the site users can view. The other controls what things users can do (what actions a user can take). The ACL for each is set up differently.
The setup for controlling what users can see is done as follows:
Any time a user is about to view an item on a Joomla page, the program checks whether the user has access to the item, as follows:
Note that Access Levels are set separately for each Group and are not inherited from a group's parent group.
The system for setting up what users can do -- what actions they can take on a given item -- is set up with the Permissions tab of Global Configuration and the Permissions tab of the Options screen of each component. Permissions can also be set up at the Category level for core components and at the Article level for articles.
Note that this set up is independent of the setup for viewing.
When a user wants to initiate a specific action against a component item (for example, edit an article), the system checks the permission for this combination of user, item, and action. If it is allowed, then the user can proceed. Otherwise, the action is not allowed.
The remainder of this tutorial discusses how we control what users can do -- what action permissions they have.
The other side of ACL is granting permissions to users to take actions on objects. Here again there is a big change between Version 1.5 and 1.6. In 1.5, the actions allowed for a given group were fixed. For example, a User in the Author group could only submit an article whereas someone in the Publisher group could submit, edit, and publish articles. Also, in version 1.5 the permissions were all-or-nothing. A member of the Editor group could edit all articles on the site.
The table below shows what has changed between versions 1.5 and 2.5 series (including 1.6 and 1.7).
||Version 1.5||2.5 series|
|Groups and Actions||Actions allowed by different groups are fixed.||Actions allowed for each group are defined by site administrator.|
|Permission Scope||Entire Site. User has same permissions for all objects on the site.||Permissions can be set at multiple levels in hierarchy: Site, Component, Category, Object.|
|Permission Inheritance||Not applicable||Permissions can be inherited from parent Groups and parent Categories|
There are four possible permissions for actions, as outlined below:
Action permissions in version 2.5 can be defined at up to four levels, as follows:
This is accessed from Site → Global Configuration → Permissions. This screen allows you set the top-level permission for each group for each action, as shown in the screenshot below.
The options for each value are Inherited, Allowed, or Denied. The Calculated Setting column shows you the setting in effect. It is either Not Allowed (the default), Allowed, or Denied.
You work on one Group at a time by opening the slider for that group. You change the permissions in the Select New Settings drop-down list boxes.
Note that the Calculated Setting column is not updated until you press the Save button in the toolbar. To check that the settings are what you want, press the Save button and check the Calculated Settings column.
This is accessed for each component by clicking the Options icon in the toolbar. This screen is similar to the Global Configuration screen above. For example, clicking the Options toolbar icon in the Menu Manager shows the Menus Configuration below.
Access to Options is only available to members of groups who have permission for the Configure action in for each component. In the example above, the Administrator group has Allowed permission for the Configure option, so members of this group can access this screen.
Category permissions are accessed in the Category Manager: Edit Category screen, in a slider at the bottom of the screen. This screen has five permissions, as shown below.
In these screens, you work on the permissions for one User Group at a time. In the example above, we are editing the permissions for the Administrator group.
Note that the Configure and Access Component actions do not apply at the category level, so those actions are not included.
Note also that Categories can be arranged in a hierarchy. If so, then action permissions in a parent category are inherited automatically by a child category. For example, if you had a category hierarchy of Animals → Pets → Dogs, then the full permission level hierarchy for an article in the Dogs category would be as follows:
Permissions for a single article are access in the Article Manager: Edit Article screen, again in a slider at the bottom of the screen. This screen has three actions, as shown below.
Again, you edit each group by clicking on it to open the slider for that group. You can then change the permissions under the Select New Setting column. To see the effect of any changes, press the Save button to update the Calculated Setting column.
Note that the Configure, Access Component, and Create actions do not apply at the article level, so these actions are not included. Permission to create an article is set at one of the higher levels in the hierarchy.
Access Levels in 2.5 series are simple and flexible. The screen below shows the Special Access Level.
Simply check the box for each group you want included in that level. The Special Access Level includes the Manager, Author, and Super Users groups. It also includes child groups of those groups. So, Administrator group is included, since it is a child group of the Manager group. The Editor, Publisher, and Shop Suppliers groups are included, since they are child groups of Author. (Note that we could check all of the child groups if we wanted and it wouldn't hurt anything.)
Once Access Levels are created, they are used in the same way as in version 1.5. Each object in the front end is assigned an Access Level. If the level is Public, then anyone may access that object. Otherwise, only members of groups assigned to that access level may access that object. Access levels are assigned to Menu Items and to Modules. Each one can only be assigned to one access level.
For example, the screen below shows the Edit Menu Item screen with the list of available access levels.
When Joomla! is installed, these are set to their initial default settings. We will discuss these initial settings as a way to understand how the ACL works.
Version 2.5 allows you to define your own Groups. When you install version 2.5, it includes a set of default groups, as shown below.
The arrows indicate the child-parent relationships. As discussed above, when you set a permission for a parent group, this permission is automatically inherited by all child groups. The Inherited, and Allowed permissions can be overridden for a child group. The Denied permission cannot be overridden and will always deny an action for all child groups.
Joomla! version 2.5 will install with the same familiar back-end permissions as that of version 1.5. However, with 2.5, you can easily change these to suit the needs of your site.
As discussed earlier, the permissions for each action are inherited from the level above in the permission hierarchy and from a group's parent group. Let's see how this works. The top level for this is the entire site. This is set up in the Site->Global Configuration->Permissions, as shown below.
The first thing to notice are the nine Actions: Site Login, Admin Login, Super Admin, Access Component, Create, Delete, Edit, Edit State. and Edit Own. These are the actions that a user can perform on an object in Joomla. The specific meaning of each action depends on the context. For the Global Configuration screen, they are defined as follows:
Each Group for the site has its own slider which is opened by clicking on the group name. In this case (with the sample data installed), we have the standard 7 groups that we had in version 1.5 plus two additional groups called "Shop Suppliers" and "Customer Group". Notice that our groups are set up with the same permissions as they had in version 1.5. Keep in mind that we can change any of these permissions to make the security work the way we want. Let's go through this to see how it works.
There are two very important points to understand from this screen. The first is to see how the permissions can be inherited from the parent Group. The second is to see how you can control the default permissions by Group and by Action.
This provides a lot of flexibility. For example, if you wanted Shop Suppliers to be able to have the ability to login to the back end, you could just change their Admin Login value to "Allowed". If you wanted to not allow members of Administrator group to delete objects or change their state, you would change their permissions in these columns to Inherited (or Denied).
It is also important to understand that the ability to have child groups is completely optional. It allows you to save some time when setting up new groups. However, if you like, you can set up all groups to have Public as the parent and not inherit any permissions from a parent group.
Now, let's continue to see how the default back-end permissions for version 2.5 mimic the permissions for version 1.5. The Super Users group in 2.5 is equivalent to the Super Administrator group in 1.5.
Just looking at the Global Configuration screen above, it would appear that the Administrator group and the Manager group have identical permissions. However, in version 1.5 Administrators can do everything except Global Configuration, whereas Managers are not permitted to add users or work with menu items. That is also true in the default version 2.5 configuration. Let's see how this is accomplished.
If we navigate to Users->User Manager and click the Options button in the toolbar, we see the screen below:
This screen is the same as the Global Configuration Permissions screen, except that these values only affect working with Users. Let's look at how this works.
First, notice that the Administrator group has Allow permission for the Admin action and the Manager group has Deny permission for this action. Remember that the Admin action in the Global Configuration screen gives the group "super user" permissions. In this screen, the Admin action allows you to edit the Options values. So, the Administrator group can do this but the Manager group cannot.
Next, notice that the Administrator has Inherit for the Manage action and the Manager group has Deny permission. In this screen, the Manage action gives a group access to the User Manager. Since the Administrator has Allow for the Manage action by default, then the Inherit permission here means they inherit the Allow permission for the Manage action. Since the Manager group has Deny permission for the Manage action, members of the Manager group cannot access the User Manager and therefore cannot do any of the other user-related actions.
If you look at the Options for Menus->Menu Manager, you will see the same default settings as for the User Manager. Again, the Administrator group can manage and set default permissions for Menu Manager objects whereas the Manager group cannot.
In short, we can see that the different permissions for the Administrator and Manager groups are set using the Options->Permissions forms on the User Manager and Menu Manager screens.
It is also important to understand that this same Options->Permissions form for setting default permissions is available for all Joomla! objects, including Media Manager, Banners, Contacts, Newsfeeds, Redirect, Search Statistics, Web Links, Extensions, Modules, Plugins, Templates, and Language. So you now have the option to create user groups with fine-tuned sets of back-end permissions.
Default permissions for the front end are also set using the Options form. Let's look at Content->Article Manager->Options->Permissions. First, let's look at the permissions for Manager, as shown below.
Manager has allowed permission for all actions except Configure. So members of the Manager group can do everything with Articles except open the Options screen.
Now let's look at Administrator, as shown below.
Administrator has Allowed for Configure, so Administrators can edit this Options screen.
Both groups can create, delete, edit, and change the state of articles.
Now, let's look at the groups Publisher, Editor, and Author and see how their permissions are set.
Authors only have Create and Edit Own permissions, as shown below.
This means that Authors can create articles and can edit articles they have created. They may not delete articles, change the published state of articles, or edit articles created by others.
Editors have the same permissions as Authors with the addition of permission for the Edit action, as shown below.
So Editors can edit articles written by anyone.
Publishers can do everything Editors can do plus they have permission for the Edit State action, as shown below.
So Publishers can change the published state of an article. The possible states include Published, Unpublished, Archived, and Trashed.
All of these groups have Inherit permission for Configure and Access Component. Remember that Author is a child of the Registered group, and Registered does not have any default permissions except for Login. Since Registered does not have permission for Configure and Access Component, and since Author's permission for these actions is "Inherited", then Author does not have these permissions either. This same permission is passed from Author to Editor and from Editor to Publisher. So, by default, none of these groups are allowed to work with articles in the back end.
It is important to remember that these permissions are only default settings for categories and articles and for any child groups that are created. So they can be overridden for child groups, for categories, and for specific articles.
Also, note that there are no Denied permissions for any actions in the default settings. This allows you to add Allowed permissions at any level. Remember, once you have an action set for Denied, this action will be denied at all lower levels in the hierarchy. For example, if you set the Admin Login for Registered to Denied (instead of Inherited), you could not grant Publishers Allowed permissions for this action.
The diagram below shows how each action in the permissions form relates to the various options on the Article Manager screen.
Version 1.6 introduced the ability to create a View Access Level that is only for guests of the site (meaning a user who is not logged in). The example below shows how you can set up this new feature.
Now, if we assign a menu item, module, or other object to the Guest access level, only non-logged in users will have access. For example, if we create a new menu item with access level of Guest, as shown below,
this menu item will only be visible to non-logged-in visitors to the site.
If required other user groups like Author can be granted access in the Guest access level, this would allow Authors to view articles in the front end for editing.
N.B. Login/logout in front end (for changing data in session) to see the change.
As discussed above, it is possible to define groups in a hierarchy, where each child group inherits action permissions (for example, the create permission) from its parent group. Action permissions are also be inherited from the permission level above. For example, a permission in the Article Manager is inherited from the same permission in the Global Configuration, and a permission in a child Category is inherited from the parent Category permission.
This dual inheritance can be confusing, but it can also be useful. Let's consider an example as follows. We have a school with a group hierarchy of Teachers → History Teachers → Assistant History Teachers. We also have a category hierarchy of Assignments → History Assignments. We want History Teachers and Assistant History Teachers to have the following permissions:
This ACL scheme is very easy to implement. The diagram below shows how this would be set up for the Create Action.
In the diagram, the Permission Hierarchy is shown down the left side and the Group hierarchy is shown across the top. Permissions are inherited down and to the right, as shown by the arrows. To implement the desired permissions, we leave the Global Configuration blank (Not Set) for all three groups. Similarly, in the Article Manager and Assignments Category, we leave the Create permission to Inherit for all the groups. As shown in the diagram, this means that these groups do not have Create permission for articles in general or for articles in the Assignments group.
To sum up so far, we have not set any special permissions to get to this point. Now, in the History Assignments category permissions screen, we set the Create permission to Allow for the History Teachers group. This setting overrides the Soft (Implicit) Deny that we had by default and gives members of this group permission to create content (articles and child categories) for this category. This Allow setting also is inherited by the Assistant History Teachers group.
Next, we need to grant History Teachers the Edit State permission while denying this permission to Assistant History Teachers. This is done as shown in the diagram below.
This configuration is the same as the one above except that this time we set the Edit State permission in the History Assignments category to Deny for the Assistant History Teachers group. This means that Assistant History Teachers will not be able to Publish or Unpublish articles in this category.
Note that this was accomplished by setting just two permissions in the History Assignments category: Allow for the History Teachers group and Deny for the Assistant History Teachers group.
Here are some examples of how you might set up the ACL for some specific situations.
We want to create a group called "Article Administrator" with back-end permissions only for articles and not for any other back-end menu options. Members of this group should be able to use all of the features of the article manager, including setting article permissions.
A basic concept of using Access Levels is that all items with the same Access will be viewable by the same group of users. In other words, if two items have the same Access, you can't have one viewable by one user and not viewable by another user. On the other hand, it is easy to have one Group view any number of items with different Access levels.
Similarly, each Group has exactly the same combination of Access levels, but one User can be a member of more than one group. Depending on the situation, you may want to have users only in one Group or you may need to have a User in more than one Group.
This means that we may need to group our items so that items so that all items in a group have the same level of sensitivity. Here are some examples.
In this example, Access levels are hierarchical, for example, like government security clearance codes. Say for example we have the following sets of classified documents: Classified, Secret, and Top Secret. Users have corresponding clearence codes. Users with Classified clearance can only see Classified documents and cannot see Secret or Top Secret. Users with Secret clearance can see Classified and Secret documents but not Top Secret. Users with Top Secret can see all documents.
In this case, you would create three Access levels: Classified, Secret, and Top Secret and the same three Groups. Users would only be members of one group, as follows:
|C1, C2, C3||Classified||Classified|
|S1, S2, S3||Secret||Classified, Secret|
|TS1, TS2, TS3||Top Secret||Classified, Secret, Top Secret|
In this case, all users are in exactly one group, but some groups have access to more than one Access Level of items. In other words, we have a one-to-one relationship between users and groups, but a one-to-many relationship between Groups and Access Levels.
Another possible use case is a set of non-hierarchical teams. Let's say we have three teams, T1, T2, and T3. Some users are only on one team, but others might be on two or more teams. In this case, we could set up our Access Levels and Groups by team. Documents for each team have the access level for that team, and the Group for the team has only the one access level. When a User is on more than one team, they get added to the group for each team, as follows:
|U1||Team 1 member||T1||T1|
|U2||Team 2 member||T2||T2|
|U3||Team 3 member||T3||T3|
|U1-2||Member of teams 1 and 2||T1, T2||T1, T2|
|U1-3||Member of teams 1 and 3||T1, T3||T1, T3|
|U1-2-3||Member of teams 1,2, and 3||T1,T2, T3||T1, T2, T3|
In a real-world situation, you might have a combination of these two arrangements. Say for example we have Managers and Staff. Staff can only see Staff documents and Managers can see Manager and Staff documents. Both types of users can be assigned to teams as well, in which case they can see all of the documents for that team. In addition, say that Managers can access some, but not all, team documents. Staff can only access team documents if they are members of that team.
In this example, we could set up the following Access Levels:
|Manager||Non-team manager documents||Manager|
|Staff||Non-team staff documents||Manager, Staff|
|Team1||Sensitive Team1 documents (no access outside team)||Team1|
|Team1-Manager||Team1 documents that can be accessed by all managers||Team1, Manager|
|Team2||Sensitive Team2 documents (no access outside team)||Team2|
|Team2-Manager||Team2 documents that can be accessed by all managers||Team2, Manager|
Then, users could be assigned to groups as follows:
|Manager on no teams||Manager|
|Staff on no teams||Staff|
|Manager on team 1||Manager, Team1|
|Staff on team 1||Staff, Team1|
|Manager on teams 1 and 2||Manager, Team1, Team2|
|Staff on teams 1 and 2||Staff, Team1, Team2|